home *** CD-ROM | disk | FTP | other *** search
- Path: news.vol.it!news
- From: mariodoc@mbox.vol.it (Mario Dell'Oca)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: C= 3070 tape drive (Caliper 150) SCSI ID?
- Date: 4 Apr 1996 05:06:05 GMT
- Organization: Video On Line
- Message-ID: <1193.6666T1281T316@mbox.vol.it>
- References: <4jfk77$o3b@conargo.dpie.gov.au>
- NNTP-Posting-Host: tiseregno4.vol.it
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
-
- In article dated < 29-Mar-96 04:08:23 >, about < C= 3070 tape drive (Caliper 150) SCSI ID? >,
- Antti J. Roppola < ajr@henric.nric.gov.au > wrote:
-
- >The Caliper 150 (the guts of the 3070) has a dip switch block on the
- >side labelled 1-9 (or was that 1-10?). I presume three of these
- >switches should set SCSI ID. The question is which ones and how?
-
- From the Installation Guide booklet for A3070:
-
- ...
- 8. Locate and adjust the thumb switch on the side of the tape drive.
- The switch configuration (as set to SCSI device 4) should look like this:
-
- SW1
- 1 2 3 4 5 6 7 8 9 10
- OFF X X X X X
- ON X X X X X
-
- only the switches 1 trough 3 need to be altered to change the SCSI ID. These
- are the left-most switches. The remaining seven switches should be left in
- place....
-
- To set the SCSI id use this chart:
-
- ID SW1-1 SW1-2 SW1-3
-
- 0 OFF OFF OFF
- 1 ON OFF OFF
- 2 OFF ON OFF
- 3 ON ON OFF
- 4 OFF OFF ON (default configuration)
- 5 ON OFF ON
- 6 OFF ON ON
- 7 ON ON ON
-
-
-
- /\/\ Mario Dell'Oca, M.D.
- / /__\ E-mail: mariodoc@mbox.vol.it, mariodoc@iol.it
-
-